Zebris FDM-T Treadmill System for Stance & Gait Analysis
The Zebris FDM-T Treadmill System for Stance & Gait Analysis is a complete stance and gait analysis centre. View short demo video (WMV 10,3 MB)
The basic system FDM-T consists of a treadmill ergometer with an integrated, calibrated measuring sensor. The sensor element itself consists of numerous high-quality capacitive force sensors. On a treading area of 150 x 50 cm the sensor unit comprises more than 5000 pressure / force sensors. Using a technology especially developed by Zebris the movement of the treadmill is compensated so that completely stable gait and roll-off patterns can be analysed. Different types of treadmill ergonometers are available for the basic system.
The display of all measuring results is effected in real-time utilising commercially available PC's. A feedback control of the force on the extremities is also possible. The software additionally provides a "signal viewer" which displays all measuring variables in slow motion and completely synchronised.
In the standard arrangement, all FDM-T systems are equipped with a video-synchronisation output for time-synchronisation with the video-camera. The optional camera module contains a high-quality video camera with stand, a wide angle lens as well as all cables necessary for operation and synchronization and the software extension.
The time synchronisation using the optionally available cordless radio adapter DAB is effected via an infrared interface. The radio adapter is connected to the PC via an Bluetooth interface and can be linked with up to eight EMG amplifiers or inertial sensors which enable the system to perform kinematic motion analysis whereby a skeleton model is animated.
Download brochure (pdf)
Treadmill for Gait Analysis - FDM-T for gait analysis with integrated force distribution measurement. Includes WinFDM-T software for gait analysis.
Sensor area: 112 x 48cm, 5378 sensors
Frequency: 120 Hz
Velocity of treadmill: 0-24 km/h
Running area: 150 x 50cm
FDM-TS: for sports settings
FDM-TM: medical version for clinical settings
OPTIONS:
WinFDM-Stance Module software extension for load analysis during standing
WinFDM-Video Module - extension for combination with video including video-camera, sync cable, tripod, FireWire cable, software extension (PC with FireWire interface is required)
Modular Extension of 120 Hz for FDM-T, to increase the sampling rate
Wireless Bluetooth Basic Unit DAB for EMG/Goniometers etc. 8 analog channels, 4 digital channels, infrared synchronisation. Includes Bluetooth USB receiver module, software extension
EMG Amplifier with cable, low noise, high impedence, no cable artefacts - per channel. Amplification: 1000.
EMG-A without Neutral electrode
EMG-AN with Neutral electrode
EMG Biomech Amplifier with cable, low noise, high impedance, no cable artefacts - per channel. Amplification adjustable: 1/2, 5/5 x 1000.
EMG-B without Neutral electrode
EMG-BN with Neutral electrode
USB Special Data Transfer Adapter allows you to switch off bluetooth and transfer data by cable for DAB bluetooth basic unit (contains patient isolation and power supply for DAB)
IRS-E Infrared Sync Transmitting Adapter is required for EMG module
High Single Pillar Trolley as a standing workplace equipped with drawer, extractable mouse pad in upper shelf, one additional shelf and integrated triple power supply socket (CEE7/III-Schuko) with switch and 5m feed cable.
Height: 1145mm
Shelves: 390 x 360mm (width x depth)
PC and Printer available upon enquiry
Please Contact Us for advice, information about options, prices and to order.
Call for pricing
inc. VAT
Call for pricing
ex. VAT